joey3108

EDITED! :smile1:

Hey Larry! Do you want to make an offer on my RAC CB? :laugh: :wink: Joe

Have..NO Buy...Yes PM me with an offer for the mizzy's and if its reasonable :love: :wah: LOL! :laugh: Everything in our bag has a price tag on it ha? :smile1: Joe :cool:

Then pry it back from Zach! :laugh: After all those hard work i put on it and hit it as long as you ever did, I would tell him to suck it up to get off my hand. :surprize: :whistle: :laugh: Joe ps: BTW I still have at least 3 in stock LMAO :money: :whistle:

I got one pulled from a tour v steel at 41 7/8 X flex on a green PROTOTYPE.$60 Shipped w/ Fedex express saver and paypal. Very clean pulled! Let me know! Joe Kwok

Then you have to buy the tools to be able to drop a pliable lead epoxy from the butt and hammer it w a long 48" rod and plug it w/ a cork. I only recommend you do do this technique only up to 2 swing weight. If you need to add more then Lead tape is the way to go, or you can combine to get more weight addition. Joe

Alex,Bending only will not do much, it has to be combine w/ a heel edge custom grind to make it more obvious. Joe

355" if it untouch.Joe

Are you telling that WTB is the worst ho in Cebu? :surprize: Joe :smile1:

I've own and hit most of Dunlop or Srixon product, mostly the blade edition. From my experiences, they are one of the best feeling club IMO. Quality is pretty much up there too. A few weeks ago me and my friend had a chance to hit the PRO 100, and YES! I have to agree w/ ARIC...They are a very nice feeling iron to hit. I must say pretty close to my unstamped TN 87. I probably have to hit them side by side a few time to be able to feel the different. Honestly, I almost buy them if not because i have 4 sets already in my hand :wink: Joe Kwok :cool:

You deserve it, enjoy it my friend! :smile1: BTW, You ask me to bend it to 52 not Ari, :smile1: A little typo there :smile2: Thanks again! Joe

Ha ha ha! You'll be surprise how good is the sound now. I was surprise my self.Joe

Make sure you give a good run at it until you understand what you really need to do w/ it base on what we've talked already.By then we'll talk again to decide! Joe

Anytime my friend! But the question is: Would it last at least 4 weeks in your bag before your eyes start staring something else? :laugh: :whistle: J/K!!!!! Joe

FAQ, To bad they can't bite me :wink: Cameronreddy, Tour heads, YES! not retail. Duke, I can't tell you how TM think, but if you are asking me about my experiences w/ the R7 TP...Here are my observation w/ my swing style: 1. Hitting low on the face below the equator, the ball will never raise at all. Imagine and remember The R7 TP shallow is shallower. :-D 2. Fade shot has nothing special, it's about the same w/ almost all my driver. 3. Draw shot is the advantage on this driver. I found out w/ my setting 6&6 on the front toe and heel and 2 tens on the back, the ball goes longer than any of my driver. However, for me is a bit scary hitting a draw ball due to less control on how far left i'm gonna hit it. Just not use to it. 4. Feel is definitely better on the 510 tp tour due to rat glue inside. I've never seen on an R7 TP w/ rat glue inside, they are completely dry. This is why also the sound are louder + the 2 ,3 and 4 grams weight act like a tuning fork. The R7 TP shallow was foamed by me to create muter sound. BOY if you did right, It sounded and felt like a Tour Stage's driver. Just awsome feel ! Be aware that the foam will increase around 10 grams of weight, in the case of this shallow face...the owner like to have the driver at 44.5", at 174 + 10 + 26 grams screws should be around D2-D3 w/ 652 speeder S flex. Foaming is always a messy job, on this head is even worst...because i have to open all the screws and let the foam over flows and let it sit and fully expand R7 TP shallow should be available the same loft w/ the reg R7 TP. From my experiences, IMHGO The shallow R7 TP out there now is not a tour issue, because i've never seen a tour issue head w/ a 0* face angle. It must have been a production and they decided not to let it go to the public and put a T serial #. However, after all the hype and my post like this one...They might ! I'm affraid if they hype it to far out of line, It's gonna hurt TM in the long run. Hope I'm wrong, cause I like the company and their products. Regards, Joe Kwok :cool:

The shallow face is slightly deeper than the DF and from the top DF is slighly bigger. Gawt I wish I have a lot of Shallow face in my hand now, I could make a killing selling it $1000 - $1300 a piece :wink:, and change my hobby to fishing after. :surprize: :laugh: joe

If you do Canadian Flag only, The epoxy is gonna add around 15 grams the most. So the head weight will be around 240 grams.Basically you can't adjust it more than that, because tungsten powder will block the flag from a clear epoxy. From my experiences, a clear epoxy is more britle compare the one i use Black epoxy for graphite shaft. To have a good epoxy bonding, the flag has to be floating in the epoxy. I've never done one w/ flag or etc in it, So i can't tell you how durable they are. Joe Kwok

3 of the heads are 1*-1 1/2* Open Face angle except the R7 shallow are dead on 0* face angle. 510TP/R7TP/R7TPshallow/540DF 540DF/R7TPshallow/R7TP/510TP Enjoy! Joe Kwok :cool:

Not yet!

Well! 300 tour was release in Japan and Europe as retail. Yes they are hi cor but IMO even the one on tour if they really test it ,,, has a lot of them will not pass the test. R7 Shallow are basically trying to replace 540XD which didn't get to much play at all on tour, Which most like is the case w/ the R7 shallow too. PS:I will take a comparison pictures w/ the 510 tour and R7 TP tour after i finished working on one here in the shop.

If I'm not wrong suggested retail will be around $180. Joe

I might be able to get one. One of my group claims his search is over. The shallow is it. As far as price goes, they are $$$$ Doug,Honestly speaking!, For something that TM considered a "failed proto" and some people selling for a $$$$$$$ of money is rediculous. I wonder who started the rediculous price! Geez! My first question on top of my head on this head is " if TM didn't release it in the market, it must have been something wrong...Right?" joe

Traditinal golf doesn't offer refinishing. They are an OEM company w/ some custom order capability. Any one need help on their product can contact me or straight w/ Mark Inoue himself. Cheers! Joe Kwok :smile1:

They will come out w/355" soon and they even gonna make 335" if I'm not wrong.Joe

Definitely! I would give you a SEAL in a blink! :smile1: