supo

well......................... jbeam 435--crazy 50 cb jbeam, 425 tour---roddio shingo kamui pro kpx 10.5--gd p9003x kamui pro pkx 9.5*---GD bb7s j beam 435 hte lowest by a long way, most powerfull thru the impact and id think the longest overall IF ur palying on tigh dry runway fiarway conditions. flight is extremely strong adn misses dont go all over the place. at address look is very square and flat , if u hit high s as a bad miss , u cud do much, much worse than get one of these . its really long but i wouldnt call this an all rounder. id play this at NSW... turtle bay... courses where the wind is a significant factor and u dont have to play many various shaped shots. think bomb /gouge to the nth degree. its the KING of bombers . straight, running bombers. jbeam 425 tour.... shorter at 44.75 once again flat and sqaure to look at. but a wee bit more compact than the 435 so u can imagine shaped shots more. hit a LOT of balls withthis driver to get used to it. took a while, but the last 10 i hit were spot on. got it centered and had it singing a sweet tune. its plenty long its def higher than the 435 BUT NOT BY MUCH... had the ball teed up at 45 mm which was max. bal lfligh was mixed cud get it low and strong and high and floating but over all its was mid low and piercing, angle of decnet was great im thinking plenty of extra yards with roll out , but with more carry than the 435.. def NOT as punchy as the 435 but its a lot more workable . and i dont think its quite as long overall, but it will be damn close. great all rounder can take his baby out in everything. top stick.., kamui pro kpx 9.5*-- bb7s changed the weight config about a bit and boy what a differnce it made. the mathcing head shaft is PERFECT, damn perfect. the low head flight is slightly off set by the higher flight of the haft and the trajectory came out mid. just above low, but iwont call it low. its higher than the jbeams. carry was longer than both jbeamsconsistantly and it was happy going righ , left straight, much like the 425 tour. at address the toe LOOKs like it sits up high but its dead flat, the shape of this head is the most appealing of all heads ive got it just screams hit me over left field as hard as u can, that where im going pal...! but truth be told , i had my nice power fade going and im telling ya this thing is a monster. its totally differnt feel ,much more tingy nad glassy feelig, the jbeams are muted. iwas going to swap the head off this shaft, but not any more its a beauty, greaT MATCH. is it long??? no. its fricken humnogously long. i was carrying this well past the others. and its a lot nicer feeling to me. i like that pingy tong kinda feel sound., its a keeper nad a gamer. "trusty" kamui pro kpx --gd 9003x. 44.5 inch huge face thats closed 0.5* . idont miss this club. tis not the longest but its not the shortest, the head weight is too light to go far. even with the 83 gram shaft. this is my best control driver than i can hit about as long as ud prob need. if i was to rid my slef of every driver bar 1.. this is the driver id keep. till im old and need a lighter shaft. i think the 10.5 * in this head is slightly too high, i will be gettign a custom 10* at 200 gram nad putting the diamana 70 s x in it . and playing it to 44.75 inch d2/ d3 nad about 320 grams. square or maybe slightly closed face. then u might see some really really good pieces pop up in BST. the major thing baout hte kamui i love folks is the head shape.... its totally differnt to others. the toe looks massively upright but it aint. its the design some might not like that shape but if u want a mental picy of a draw at address like i do bec im a ade all hitter............... then this is the huckelberry overall..., longest prob still the 435 then the 9.5 kpx best control 10.5 gd p9003x then the 425 tour. stews club..... still to come.., but its prob the cstom one im going to get done, amalgamte the best diamana shaft with a bit more punch and a bit more heeight of 10* at a short length. the best driver ofthese is the one that sute yr swing paln, if ur a hooker the nthe jbeam cant be beaten. if ur a slicer then the kamui will look like heaven on a stick. it does to me.

well ill tell you next week i guess. im gonna take hte jbeam 435-crazy cb50 jbeam 425 tour-roddio shingo m6 kamui kp-x-GD p9003x kamui kp-x--crazy sigma 50 out for a wail off.... see what happens.

hahaha ddi someone say DPS ? he shud use the 2s14s. hey this ido know , bec i spoke to the man himslf.. this guy works for labo spec ONOFF... in their tour van making the gear ,hes an otaku to the nth degree. litle japanese guy , kinda chubby, glasses. .....TOP guy..... loved him.. he wanted to make me my own crubs,, but it was so damn exxy.. anyway he used to wokr for graphite design as one of THE tiger shaft makers....... yup he doesnt use stock off the shelfers he had them hand made personally for him. me stil thinks hes got it all wrong..!

i dunno thats ahy im asking.. id hazard a HUGE GUESS. that tiger shud be using ANYTHING else than what hes got now hes rubbish!!! how can a guy THAT good be so horrible with the clobbering weapon. id have with the diamana X or gd 9003x 80 and a jbeam 435 . would ease.................. that rediculous slicematron thing hes got. jeeeee thats a horrible miss, makes me cringe. he aint never gonna win tournys again till he gets LOTS more consistant with the bazooka. too many big guys out there now gunning past him. hes GOTTA do something. i wanna see him win LOTS more might send him a club ...............! tigers supo weapon..., jbeam 435 9.5* 206 gram. SQUARE HEAD....! toe lie 1*upright diamana X in godzilla flex at 80 gram. paly to ( what is he 6'1 - 6"2 ?? ) so 45 inch no longer. keep the fricken thing as a control stick... hes not gonna loosse any distance over the di with the diamana , migh do with the p9 tho. diamana X he might actualy like. dont think any other head wud suit him, he break them. unlesss ryoma cud make a TIGER head .. then hed struggle to hit it right

the jbeam harsh??????? good lord..... i find it the exact opposite. its mushy dull and muted. THUD.........................., compare this and the kp-x and ul lfind the opposites allright the kpx feels much harsher. i had a jbeam 425 tour with crazy black 50, the original a long time ago, sold it bec........ yup u guessed it........ i played it too well. no point. had to change. im sick, twisted and totally deranged....................................

damn fools.............! freddy coupls pays for his own clubs i KNOW that ...!

theres been a glaring exemption form this list that getting rectified as we speak..... jbeam 425 tour 9.5* head. ive been contemplating what to do with this baby. the shafts i have to decide upon were the : crazy boron X diamana stinger 70 X or S diamana X 70s graphite design 60 X roddio shingo spec m6 proto X crazy sigma 50 7.7 crazy 80 ls noir 8.2 each of these is a heck of a shaft . but then i ahd to decided what i wanted this driver to do, what was i going t ouse it for esp, as i already ahve the 435 /cb50 8.2 in rotation.. no point doubling up. so........., the RODDIO shingo got the nod, bec it plays to 44.75 inch with tip weight , SW @ 2.25 , 321+- gram , head weight 199 g i didnt want it to be an out and out accuracy club. i want to get this thing singing, i dont mind if it goes a bit awry form time to time iwant to wail on it assssssssssssssssss. so it cudnt be too heavy either. the roddio got tbec the noir is a control shaft, the diamanaX is low and htis head isnt what ud call a soarer... the crazy boron i think is a wee bit too soft for my preference, the stingers well i got a heap of them playing already............. the roddio is taught its high its unbeleiveable feeling and ........ iu love how it looks..... the other main choire was the sigma50 bec its 81 gram and it hammer time, but i thought this might make the club too heavy overall. im saving the sigma for a kamui kp-x in 10.5* that i can basically happy gilmour . ill go head to head sigma 50 VS p9003x itll be ready tonight. THIIS.. will be interesting

u think the reason they dont play these shafts is the fact that they have never been intro'd to them.., or they are paid by US companies to play thier stuff. ? if it were my JOB id make damn sure i knew everything there is to know club wise about whats good better best...,

good lord!!!!!! $125 fellas,,seriously.. THAT is preposterous.... seriously what the ???????

yes ! u wont be pulling that into the bushes left iassure you. great match..

the latest ones..., shud be arriving soon. not a bad job me thinks , esp after the condition i send them over in. from this..........., to this..!

the photos are shiiiiiiit.. its in fantastic nick. illretake them again. its as shiny as it comes.

heres the full shot ...,

miiiiiiiiiiiiiiiiiiiiiiine..!

im going to regret this i know,,,, but theres no point having 3 of them thats a bit of over kill so im going to get the 14.5* and sell the 13* original egg with roddio s7x IF this thing is 3/4 as good as this it ll be brilliant. i like the shape of the new model a LOT and as the new one is deeper faced and heavier , im just salivating over it. like kid in candy shop yup decision made.... T......................... send me one.....!

yep it hits the ball very nicely. ive got a cpl of very special pieces now that i cant see going too many places too soon , i hope my son is right handed. hell have a few bits and bobs to play with if he is..,

hhhhhhhhhhhhhhhhhhhahahaahaahahaha thast THE classic defintion of ho dom selling a driver , then it pops up agn on bST and rebuying it hahah briliiant.......... ive only done that 64 trillion times!

check this litle fella ive been secretly using for mtime to time.. iabsolutely LOVE the lines ,the shape and the size ofthis guy. besides the 2012 this little chap has rocketed up my fav, heads list.. i just pulled that shaft possible to make way for the crazy sigma 50 at 44.5 inch i fancy this thing a wee bit . certianlygoes..! thsi is one of the most moveable head ive hit. obv being yamaha is pretty well made/ designed. and it feels typical of yamaha...

this is it

J.., thats prob exactly what ill do. the FEX and hte egg are magic.

same as daves. i got a set of tc 100s which are butter soft , but they are a bit more..,

right thanks fellas il poas the piccy of the putter see if anyoine can recognise the style. its got some kind of insert in the sole , looks like plastic.

nup its non of them theres no whitlam reference anywhere on it

Gents , i got my mits on a heck of a putter recently its a sus 303 . i played it extensively in hokkaido last week with great results. its prob a bit too light but matters not bec its really nice to play and i seem to roll it very nicely. now i dont know a THING about this company but , the putter i have is a golds factory made modified one , its got the G mark on it so sent the photo to sasaya san and he knows the putter bec it was made for a certian Japanese pro who likes funny hats in 2002... i have been a bit taken by this putter, the feel is really quite differnt to my other ones. very hard to explain, but it is. its kinda hard/ soggy all round . the feel is the same the whole facet hru, theres no had and soft spots , everyhwhere feels the same and everywhere feels lovely, those that know this company and its wears can u pls give me an iside on them, i see tons of guage design stuff about and i had an aluminium putter of there s a while back but it turned out to be a piece of cheap assssss spam ,the fricken neck broke! so i steared clear of them till this one popped up and theres NO way i cudda said n to this little black duck. in general is this label any good, bec THIS putter i have is lovely..... but the old one was horrific. ?

demand......................,