robbie

ill guess its 225k or more…..but 125-150k would be a bargain !!!

In terms of newer drivers getting shorter in playing length, the Taylormade SLDR TP measures out at 45.25 which seems about a quarter inch shorter than the normal 45.5" -45.75" that Taylormade drivers usually play.

i bought some stuff from taylormade japan and found size 0 to be perfect……it was slightly larger than a US large…..In hong kong, however i would be a xxxl at least to be slightly larger than a large….im about 6'2 185 l for reference and wear a suit size of approx 42

Sorry but it is gone

Hmmmm….thats good to know, maybe they will show up again or second hand sales via craigslist. Thank you

Is that nitro filled and foamed ?

i thought dg tour issue irons were only weight sorted ???

Damn Jim those irons are sexy !!! very tempting * Any chance of heads only ?

There was nothing i was really attached to besides the bettinardi, so its not too painful !! Although the bettinardi was handmade it does have some nasty roadrash on the rear flange but its not noticeable at address.......One time i tossed it at my bag and it bounced off the grass and onto the cart path.......the other time i "gently" tossed it about 20 yards onto a cart path, haha so its not exactly mint !!!

The clubs were in the trunk of my car, cops suspect that a thief with a code grabber broke into my car......i guess im gonna have to buy some new stuff !

Im going to do the pawnshop crawl tmrw.....i dont think there are too many used golf club shops in san francisco. The closest i can think of is Golf mart in south san francisco

Thank you for all your help guys !!! I guess the bright side is to rummage the closet and pull out some oldies but goodies to tie me over until i can replace what was taken.......

Thank you Eca !

I realize quite a few of us browse the BST on various forums, and I need a little help. Just went to my car and realized a few golf bags were stolen. Among the unique items are a P-Tune PG313 equipped with a Graphite Design G60X flex shaft, this shaft is unique becuase it has the Taylormade graphics from the R11 series. Also a Yamaha V203 with Graphite Design G60X flex and a set of Taylormade 2011 MCs equipped with custom white pearl KBS shafts and a handmade c/s 1:4 Bettinardi mallet putter. * These were stolen in san francisco, so if u happen to see these at a local store or on ebay or another forum, please let me know. Thank you -Robbie

i had a 435R and hated it !!! I tried several shafts but could not make this head perform. It is a good looking well shaped head but mines was a bit of a lemon. Maybe I had a dud because i know this club has many fans. In this case, it was definitely the driver. This is the first club i ever had that my buddies handed right back to me after hitting it a few times and say " meh, no thanks " After owning many Ryoma D1s, i would rate this club as better than average and a solid club, forgiveness is better than average and it keeps the ball down. However you should consider TRPX and Kamui TP-07 Nitro !!!! If u ever get a chance to try out the P-Tune, it is a very good club.

Sorry Im late but i hope you all had a very merry christmas !!!!!

im loving the taylormade tp series and have multiple sets of mc and mb's.....if these make my bag, i have a lot of taylormade gear to sell : (

Thankx Free ! Just needed to try these puppies out, i seriously doubt they can touch my Taylormade tp mbs. I would be shocked if these make their way into my bag or backup bag or backup backup. They are plenty sweet to look at but ill probably smack them a few times and pass them along.

These irons have been through Spoon and Janko before Exhaloprez. Im sure Janko and Exhaloprez are "clean" as for Spoon YMMV.

Merry X mas !! paypal sent

its better to be safe than sorry, whether u use a micro torch or a heat gun, the heat is cumulative and metal is a good conductor, it may be safe to reshaft a 1000X without any damage but since i dont know, i will use a wet towel to minimize heat transfer to the head and a minimum amount of heat !

yep that was my old set....went to sevenbirdies and then metalhead and then you !

The Moz 2030, i had a set of those and loved them.....they were one of the softest irons i have ever owned and forgiveness and playability were top notch. Expensive puppies though !!

time for a few new toys !!!! $325

Kamui Reshafting !!!! * The TP-07 with foam is susceptible to damage with high heat, the foam will melt and move if too much is heat is apllied during reshafting and for multiple reshafts as well. The best way to protect this head during reshafting is to immerse the head in a small tub of water or wrap a very wet towel around the head and only heat the hosel using low heat. A plumbers torch will be way too much MAP gas burns extremely hot, i would use a microtorch or a heat gun with a very good puller.