tsg4tch

?

Head weights can & do sometimes dictate shaft choice. Those heads are nice and heavy--my guess is they're targeted for a 37.5" 5-iron set. I have a custom forged set of tour heads that are ~2 grams lighter than that set. I had to use DGSL shafts at ½" short to get the swingweights down to D3/D4 range. I prefer a shorter iron, but a taller man who needs an over length shaft would have to use a very light shaft with those head weights to get a reasonable SW.

I still play the Taylor Made TP 3U driving iron I bought from Chris a few years ago. I put a DGSL shaft in it at standard length weighted to D2. I carry it ~230-235 yards and can hit it low or high. It takes a draw more readily than a cut, but I can cut it with an exaggerated grip to get out of the woods when needed. It is easily the safest club--least likely to be replaced--in my bag.

I want a set. Ping me when you're able to sell them.

1. Favorite shaped driver from Top Line? R5 2. Favorite Sole Design? Don't care 3. Favorite type of Score Lines (line type, how many lines, paint filled, non paint filled) Don't care 4.Hosel Type? (Short Hosel, Long Hosel, Unique Shaped Hosel) Short Hosel 5. Color or Colors? Black 6. Favorite Material For Face? (9-6-4, Beta, SP700 or other) Don't know/care 7. Carbon Fiber Crowns? (Yes or No) No 8. Would you prefer not to have to use a tool to adjust your weight? Prefer to have the option to adjust. Leave a hole where I can put some hot melt in it, too ;) 9. Best Sounding Driver? Tour Taylor Made R510 Prototype w/hot melt 10. Alignment Devices on top of head (Paint, engrave, or none) None

Uncle! I give.....NC-1s it is. :tsg_smiley_laughatyou:

Have you tried the Miura 301s yet? That seems to be the only set of irons standing in between me and a set of the NC-1s.

Projext X High Launch shafts throw a variable into the test. I like the looks of the Mizunos and the NC-1s.

Dalehead Flat Sole 9½" first step.

How about a close up picture of the back?

Also, when is the "new equipment" show in Japan?

Chris, How much, how soon, can I get a lob wedge grind on a 58*, what shafts? :tsg_smilie_whistle:

I have one of these....rock solid! :tsg_smilie_cool:

If I were ordering for myself, I know exactly how I'd customize the grind and offset. Without knowing that, it's a lot of money to spend for a grind that may not suit you. Where do you play most of your golf---soft conditions like Northern California or hard like East Texas? Do you take big divots with a steep swing or shallow/no divots with a sweeping swing? The only real issue I have with the MP-60s is the offset in the short irons, but I prefer very little offset in my irons--like a Titleist blade. I really think their nickel is super sweet looking, but I have never worried about the bag chatter that forged irons get over time. I kind of like that weathered look. I believe, and someone correct me if I'm wrong, you can get the "M" stamp inside the cavity high on the toe or below the cavity in the middle bottom where "Mizuno" is usually stamped. Let us know/see what you chose. After much discussion with Tom Wishon, it's my understanding you have to reposition a lot weight in an iron head to materially affect foregiveness/COG, fwiw.

If the plating added a little headweight to these wedges, they might be really good!

Selling, not selling, selling again....? Hard to keep up.

Chip Usher's page

I think they're still making Scratch iron heads?

Agree, but perhaps they'll clean it up a little since it is a prototype.

hmmm.... "Turbo Rubber Technology" ........I wonder how that stuff would work in condoms? :tsg_smiley_laughatyou:

Serola Biomechanics Their elbow brace is top notch.

If you could buy a game Donald Trump wouldn't have to lie about his handicap. :lol:

GAS 1 v GAS1 SQBT

http://www.clubglove.com/user/ViewProduct....sp?ProductID=34

These are SOLD ! Please lock thread, thx.