Posted February 18, 20204 yr comment_274036 Hey everyone, so my quest to get to one bag has begun, I have sold most items (although still have 2 brand new sets of wedges (a grind black limited and first run chikara prototype) that i am still looking to sell, as well as a brand new golds factory private stock no.2 my goal is to start fresh from the ground up and to build one bag, no excess. *I have a driver; JBeam J3 Tour and putter; Grandista McQueen GSS on order through TSG Irons are next up on my list; I am thinking players CB. Would love everyone's help. A Grind R1 CB? Miura Giken TC-101 ordered through miura craftsman world the way I want. But really am open to suggestions, thoughts. Anything out there in S20C that would fit my criteria?
February 18, 20204 yr comment_274037 a-grind, excellent choice. one of the newer mizunos looked nice too. onoff kuro .. pointless me chiming in il only point u to old stuff.. its miles better . than pretty muc hanything ive seen JDM in the last fer yrs. go back to 2011 and look u might get a pleasant surprise btw.. its made of EXACTLY the same stuff!
February 18, 20204 yr comment_274038 2 hours ago, 604_skyline said: Hey everyone, so my quest to get to one bag has begun, I have sold most items (although still have 2 brand new sets of wedges (a grind black limited and first run chikara prototype) that i am still looking to sell, as well as a brand new golds factory private stock no.2 my goal is to start fresh from the ground up and to build one bag, no excess. *I have a driver; JBeam J3 Tour and putter; Grandista McQueen GSS on order through TSG Irons are next up on my list; I am thinking players CB. Would love everyone's help. A Grind R1 CB? Miura Giken TC-101 ordered through miura craftsman world the way I want. But really am open to suggestions, thoughts. Anything out there in S20C that would fit my criteria? are you only interested in new irons or are you also considering older models? some newer model player's CBs are: Honma TR20V, Fourteen TC920, Miura TC-201, Yamaha RMX 020, Baldo Competizione 568 T2, OnOff '17 Kuro, CGS Orion Closer CB, Kyoei KK CB or Protoype CB, Epon AF-305,Seven CB and SC some older models I can think of off the top of my head are: Yonex Ezone CB301, OnOff '15 Kuro (I think somebody is selling a set on the BST), PRGR iD Nabla Tour, PRGR iDBL, Yamaha RMX 118, RomaRo Ray CX, Fourteen FH900, Epon AF-Tour CB, Mizuno MP-66
February 18, 20204 yr comment_274039 Yamaha 2009 to 2013 are highly rated. OnOff forged 2011 to 2015. S-yard GT type-s. Taylormade Burner forged 2009 and I'm going to try the R9 forged soon. Tourstage 705m Loads of others....... Would love to try the Mizuno MP55/66
February 18, 20204 yr comment_274042 I don't think hunting for S20C makes much sense as based on the design, finish and dimensions of the club S25C can easily feel softer. feel really depends on many factors then if you move to SS400 or S15C you are even softer in theory but have lie's and lofts getting bent out quick. Of what you mention TC-101 with MCW options sounds awesome.
February 19, 20204 yr comment_274051 ooohhhhhh.. k Yamaha tour 2010. nabla tour , good if u like a squarer shape syard.. like that one ,good call! prgr tr500!!! prgr idbl still cant be beaten IMO 2017 shingo model onoff kuro I love! tourstage 701g SUPERB irons much as I hate to say it.. TM tp 09 cb ( designed for sir Nick) iactually ahs this set and loved them. NEVER again has a tm set foot in my bag,, same as the driver , the triangle Tp driver is til lsue with a bimatrix 100g steel tip for links play @ 44 inch 09 they got the TP so right!
February 19, 20204 yr Author comment_274056 thanks for the replies everyone... i am totally ok with older models; the only caveat being the condition of the heads must be brand new, so if i could find a brand new set of the yamaha tour's from 11/12/13 i would be all over them, so yes older models are fine, provided i can still find a set brand new (which is not so hard to believe, as there was a brand new set of mr-23 us blades for sale less than a month ago on yjp auctions)
February 19, 20204 yr Author comment_274059 just came across the Masda HC-01 they look damn good! as well as the PRGR Tune 01 CB.... and finally the Orion Closer Cavity Back Edited February 19, 20204 yr by 604_skyline
February 19, 20204 yr comment_274061 12 hours ago, 604_skyline said: just came across the Masda HC-01 they look damn good! as well as the PRGR Tune 01 CB.... and finally the Orion Closer Cavity Back Out of those three, I would go with the Closer CB. ( or even the CB/MB Combo )
February 20, 20204 yr Author comment_274066 Nob, thanks for the insight, they do look good and the fit and finish would be top notch, however I can not find the face progression measurements, and from the pics, the orions look like they may have a little too much off set...
February 20, 20204 yr comment_274069 On 2/18/2020 at 8:31 AM, 604_skyline said: Hey everyone, so my quest to get to one bag has begun, I have sold most items (although still have 2 brand new sets of wedges (a grind black limited and first run chikara prototype) that i am still looking to sell, as well as a brand new golds factory private stock no.2 my goal is to start fresh from the ground up and to build one bag, no excess. *I have a driver; JBeam J3 Tour and putter; Grandista McQueen GSS on order through TSG Irons are next up on my list; I am thinking players CB. Would love everyone's help. A Grind R1 CB? Miura Giken TC-101 ordered through miura craftsman world the way I want. But really am open to suggestions, thoughts. Anything out there in S20C that would fit my criteria? Hey off topic a little, how do you find the j3 tour? Compared to black 435? Cheers!
February 21, 20204 yr Author comment_274073 Have not had the chance to hit the J3 Tour yet, was only ordered this past weekend, still have to decide on a shaft, leaning towards loop prototype ip. Back to the irons, am I missing the obvious choice? Kyoei Prototype CB?
March 1, 20204 yr comment_274120 What about refinished older irons? TSG do mighty fine work. Or the TC-101 before the Kyoei in my book.
March 2, 20204 yr comment_274130 I think TC-101's with MCW is a good option. 21 hours ago, bngolfer said: What about refinished older irons? TSG do mighty fine work. Or the TC-101 before the Kyoei in my book. Yes, Tour Nabla's, iD BL's, something along those lines refinished. On 2/20/2020 at 6:42 PM, 604_skyline said: Have not had the chance to hit the J3 Tour yet, was only ordered this past weekend, still have to decide on a shaft, leaning towards loop prototype ip. Back to the irons, am I missing the obvious choice? Kyoei Prototype CB? The KK CB, I am working on replacing this model next. 15 hours ago, D22marshall said: Just get the seven cbs and be done Easy choice but $$$
March 2, 20204 yr comment_274134 5 hours ago, TourSpecGolfer said: I think TC-101's with MCW is a good option. Yes, Tour Nabla's, iD BL's, something along those lines refinished. The KK CB, I am working on replacing this model next. Easy choice but $$$ Seven feel really good
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.