wmclarenf1

Left it as in left by the green side after a bump and run. Forgot about it, came back after a hole, gone. Back guys said they didn;t see it. Course lost and found said nothing found so... lost. cest la vie.

Thanks. Yup. The price is good. Making me re-think :-) ... but this is just a hobby so I'm not in it to make a buck. Got it at a fair price, passing it on at an even fair-er price.

Not a demo. None of them are to my knowledge. I actually left the original satin 8I on a course so I got one in Black just for the heck. Oh.. forgot to mention... I was told by the seller that the heads (not the 8I black) are tour issue. No way for me to confirm and I did not by them for that but that is what he said. Came with DG X100 shaft originally.

Thanks C.

Forgot to mention trade interest : Only looking for RH Ryoma Premia 10.5* HEAD and H/C only.. Thanks again for looking.

This is a one time, low heat, very good condition PULLED Quadra Fire Express FW 55 shaft in SR flex. Plays to 43 inches finished length in the PRGR Egg Spoon 15*. Very lightly used as I only play my 3W off the TEE and never off the deck so at most 3 times a round and sometimes never. Selling Price : $315 shipped and paypaled. Shipped anywhere with tracking. Lots of good feeback on wrx as well and have recently purchased from TAE here as well. Thanks for looking.

Did the translation intend that the AF102 is hook inclined? I did not find it so. And the AF103 is supposed to be more for carry now which maybe meant the 102 was too low spinning?

So what is this supposed to do better than the 102 or 101?

PM sent on Quadra 652 iron shaft set.

I found the post about Crazy logo up/down and my mistake, it was the experiences of a member. T only mentioned for Crazy shafts, the spine is always logo up or down. The member posted this: "I tried different spine positions (3,6,9,12 o´clock) with Crazy LY01, CB46, FW80 and got very very surprisingly results. ..with Crazy LY01: Spine at 12 o´clock - perfect impact pattern (smashfactor up to 1.5), very straight but my launch was to high, not much roll out, "perfect carry driver", Spine at 6 o´clock - more piercing trajectory, much more roll out - gained up to 15 yards (measured with LRF), swingspeed (measured with REP) was about the same (maybe +1 mph) Spine at 3.. - inconsistent ball flight, unstable feel Feel at "6": very easy to load the shaft vs. spine at "12" mybe better for hitter." I must say for me, I played my RD at first logo up 12 o'clock and then tried 6 o'clock logo down and I do concur with this member's experiences in terms of a more piercing trajectory and slightly lower.

To infer from their earlier reply, their shafts have 2 hard points (spines?) which are located logo up and 180* of that ie logo down. My new FEX 55 has a yellow line where the logo is and I will be installing it logo up in my Ryoma when it arrives as I did with my FEX FW in my Egg. I am very pleasantly surprised that they respond so fast and to the end customer and nice to hear from the horses mouth so to speak.

THe official reply from Quadra for those interested : <div>Our shafts are designed that logo side and opposite side</div> <div>&amp;amp;gt; We are testing repeatedly and have result that they are</div> <div>no difference.</div> <div>So we can;t tell you which side is the best for you.</div> <div>I;m afraid that we don;t have people who are good at</div> <div>English.</div> <div>I;m sorry it;s difficult to explain in detail.</div> Interesting that Crazys then have a different impact on performance for logo up or down.

Quadra just replied my email and they said their shafts have 2 hard points where the logo is and the back of it and can be installed up or down. I have asked further if logo up or down has different playing characteristics flight and spin wise and await their reply.

From my experience with the Roddio, I found the best performance with the white part facing back. Just FYI.

Hi, That is what I am thinking and trying to ascertain for FEX shafts. Also, if logo down plays one way for eg SLIGHTLY less spin and SLIGHTLY lowere flight for example, then does logo up promote the opposite? IIRC, what was posted in some thread here said something to that effect for Crazy shafts. Can;t seem to find that post now.

As I mentioned to Robbie, "I ask this here only because I read a forummer here in some thread on Crazy saying that T mentioned Crazy's are to be installed logo up or down so I was wondering if there was a similar thing for FEXes." Spining in this case would not be pointless if Quadra somehow ensured that the spines for their shafts when installed are always logo up or down.

Not true Robbie from my fitting experience at least. I've never bothered spining the Crazy shafts as I try just going from what I read here and hence just go logo up or down. But my Quadra FEX FW shaft definitely had a spine and it just so happened that the spine resulted in either a logo up or down depending on how you want to play it. I ask this here only because I read a forumer here in some thread on Crayz saying that T mentioned Crazy's are to be installed logo up or down so I was wondering if there was a similar thing for FEXes.

Thanks. Any feedback on dfferences in performance like the Crazy (well supposedly at least)

I read somewhere here that for Crazy shafts, logo up promotes a higher ball flight and logo down, a slightly lower flight and more roll. I tried logo down with my Crazy in the 435 and it does seem to have lowered fight a bit from the original logo up install. So the same question for Quadra Fire Express? What is the prescription for this? Logo up or down? Thanks in advance.

I think al most all accessories like bags, headcovers etc regardless of brands are made in China nowadays for cost reasons so the QC is pretty much the same. If there is a defect, then it comes down to how the brand manages that and of course some are better than others in this regard.

Paypal sent Tae.

Changed the model search to Premia 9.5*. Thanks for looking.

HI Tae, Thanks for the PMs. Replied.

Hi Tae, any chance of me taking the Miura 50 but with the Quadra Fire expres shaft? No need to reinstall just pull the shafts. PLs PM me.

As a suggestion, you MAY be struggling with the loft of 9.5* for this particular head.