gregoire56

have them messaged over to you very very shortly.. i'll also add them onto the listing if you wind up not wanting it

Hahah thanks! I humbly agree

Closed

I have a white 11* head if that might be of interest, I really like the higher loft combined with a super low launch shaft, I currently have a TourAD BB installed

I have an Epon AF-105 driver 10.5* and an Epon AF-203 3w if you have any interest in either. Both are in very good condition

ah they must just be messed up on my computer saw that, even more enticing now.. also considering an Astro VIII driver or MA01F 3w, hmmm

what happened to the pics? i'm seriously considering one after seeing this post

CBs still for sale?

these sold?

You always know just what to say..

...actually, in addition to the Tour120 TX and Tour125 X, I'm also giving serious consideration to the Shimada K's Tour X iron shafts - anyone have any experience or input on these shafts? thanks

Thanks for the info, fellas. That's pretty much what I was thinking, but this is my first time using this shaft so I don't actually know, and I couldn't find the data. As always, I very much appreciate the shared wisdom of the masters. I'm just going to snag a new set of shafts and fix em up right; thinking either Tour120 TX or Tour125 X.

IMPORTANT QUESTION: I just bought a set of mint condition irons that were built for someone else's specs, and am trying to work out how I am going to alter them to meet my own specs. These irons have Nippon modus3 Tour120 stiff shafts that I would like to keep, if possible. My problem is that I do not have enough practical knowledge about the modus3 Tour120 shaft, and there's not enough info on its webpage. So.. since I bought a set that was built for someone else, it is +1.0" longer than I need it to be, although it is the proper weight and bend profile; however I was fit to 6.5 iron shaft frequency (which can be achieved by hard stepping a Tour120 stiff shaft 1x) which is perfect for the X or TX flex, but not the S flex which needs to be hard stepped once to achieve a 6.5 frequency. My plan is to remove the heads and take -0.5" from the tip and also -0.5" from the butt.. but here is my problem: since I am going to be pulling these shafts, I do not know if they will THEN be able to be tipped -0.5" and still fit the iron heads. If these were 0.370" parallel shafts I know this wouldn't matter at all and I could do exactly that, but since they're 0.355" taper tip shafts and they've already been installed once I'm not sure if they'd still be able to be tipped -0.5" more, or even at all, and still fit the iron heads. So...…… my question is whether or not anyone has any knowledge that could be relevant to helping me get this set built to my specific specs: 6.5 iron shaft frequency, -0.5" from std length, std lie/loft. I am trying to achieve that result from the spec of the current set: standard Tour120 stiff flex frequency (unknown), +0.5" length from std. If anyone can offer any sage advice I'd greatly appreciate it. Thanks very much. Drew G

Wow awesome gear. Glws

Totally agree with both your comments about this set, which are seriously amazing and you probably have them listed for half what just the shafts are worth, and the other members on here who frequent the BST, I've also bought a whole bunch of clubs from some of you guys and you're all great fellas. Yup, same boat for me. I've already gotten so many great clubs and deals from the BST I've never been more pleased with my setup. Spot on

Very very true.. much love for the scandinavians, just not much practical golf equipment knowledge floating around the USA anymore, aside from the handful of people who regularly buy and sell on here. I still find it hard to not make an offer on such a nice set as these, even though I already have an extra set of my own iron heads, if I were in the market you'd have already shipped these to me

Damn

Definitely nice to finally see a review for the Kyuzo on here.. always thought it looked terrific but no one ever wrote anything up from personal experience. I have a Seven Limited SH and I must agree with your opinion of the sm490a material, very appealing and unique feeling.

I'm quite partial to the HW120's also, the other wedge shafts I'm currently using are the PRGR SSIII's in my iD Nabla Tour wedges, which are really a 110ish gram high kick wedge shaft made for PRGR by Nippon. I very much like both of them. The HW120 is very stout with great tight dispersion, and I have no issue getting plenty of spin with them; their biggest stand out feature I feel like is the OD at the butt-end feels a bit wider. The PRGRs/Nippons are a smidge lighter and veeeeeeeery smooth but they also feel plenty stout for my liking, and they spin like a mofo and the dispersion is also extremely tight. Aside from them, although I'm not using any right now I very much like all the Dynamic Gold wedge shafts I've used, and I also highly recommend the Tour Issue Wedges and X100s, plus the black onyx ones look really cool.

hahah classic.. like internet trolls they're all DJ when they're talking behind the computer and not on the course

100%

I like to think that I have a pretty good collection of quality clubs... but I always get jealous when I read your newest gear posts. I've very much wanted to get my hands on one of the MA01D+R's and either a Romaro '17 Type R or a '16 Ray V , and I really like my RS-001 with DAT55G but the new RS-D with SP700 looks aaaaaawesome. Also, by the way, the MP-Craft you gave me is still working out fantastically, and you were spot-on in every way you described it. I'm having no trouble with the 9.5* loft, it really doesn't look like a 9.5 at address so I have plenty of confidence with just putting a good swing on it. Love the shape and profile. And the performance.. well, as you know, seems second to none

That's a solid idea, i never thought of it. I love the feel of my ZY-11 which is Factory foamed, I never thought of this easy way to not only get a similar result, but also add some usually needed weight to the club head. Consider your idea borrowed..

Pm'd

so the new wedge is not from Endo, even though it's s20c and has he same face mill as the ID nabla Tour's from a few years ago that were Endo forged?