RIduffer

Wouldn't simply doing logo up or logo down imply that spining is pointless?

Does anyone know the hosel size on the RC TRC D/S or alternately the tips size on the GD F75 shaft? thx

I have one of the new Super XTDs sitting in my office and was curious on the length so as to approximate distance on it... Thanks...

Have a set of the Baby Blades in pretty good condition, not black though. They are in the USDM BST section...

If that were the Zero on the Boron I'd bite...

The one without the head on it, or the one in the 14*3w? In either case, yes...

Stew, How long do you play 19*? TIA, RIDuffer

Did you have a bad experience with a mascot in your past?

Agreed... Not a fan of the purpose made Wedge shaft. can't say I use an 8-9 iron, usually get a few extra iron shafts and have them built using the #10 shaft...

Sold...

Let's move this to PM... The shafts are sold...

I have 3 OEM'd black ones I can do. They don't pull very well...

I'll have a set of Modus 3 in a week, but they are ungripped.

Spined yes, FLO'd I don't believe so. Grip Master logo is aligned. If the KBS go too high, then I would'nt recommend them just to try the grips. I have a couple still sitting around although they are OEMd versions. But I will say the SP Blue/Miura combo is a penetrating flight flag hunters setup....

I used them on everything for a number of years and loved them. Live in humid conditions during the summer months, and the rain is no issue. Haven't used a glove rain or otherwise since I started using them… If you want to try the grips, I have a set of KBS Tour Blacks in S in the USDM area that also have the grips...

Crazy UT X stiff untipped butt cut to play 41" - $240 http://www.tourspecgolf.com/product_info.php?products_id=2937 Quadra UT 100 X untpped butt cut to play 40" - $260 http://www.tourspecgolf.com/product_info.php?products_id=3533 GD F-75 S pulled from an RC TRC D/S - $60 http://www.tourspecgolf.com/product_info.php?products_id=3266 NS Pro 950 GH WF S 5-AW(6 shafts) pulled from TS 905 MB $75 NS Pro 950 GH S pulled from a RomaRo UT playing 39.25" - shipping and PP fees

RC TRC 14* FW GD F-75 S http://www.tourspecgolf.com/product_info.php?products_id=3266 1 tee mark on the sole of the 3W otherwise in very good condition, just don't use them any more… Asking $215 for the wood plus shipping and fees... [

KBS Tour Black in S 38.5" 5 iron Grip Master Tour Wrap $60 plus PP and shipping

A set of Blade Golf TF-2 Blades in copper. 3-PW set. http://www.bladegolf.com/tf.htm When purchased was told they were made from Miura Blade blanks. Blade Golf will validate for serious buyer.... One of the softest I have used... Patinaing nicely NS SP Blue in Stiff 38.5" 5 iron 62* lie angle D2 isn with Grip Master Leather tour wraps $750 $450 plus shipping and PP Fees, no fees for PP gift.

For sale are some older sets, priced to move… Nippon Super Peening Blue S 38.5" 5 iron 62* lie angle playing around D2… All shafts gripped with Grip Master Leather Tour Wraps. Miura BB - $800 $500 shipping and PP fees to be added, no PP fees for gift...

As long as she was born before mid August otherwise you can't even take her to a bar in the States...

Agree with Swisstrader

Why extra tipping? I suppose a heavier head causes a slight reduction in stiffness, but wouldn't a similarly weighted head have the same impact? My bigger question is whether the insertion depth of the shaft will have an impact on the performance, or is that why you mention tipping?

When I have seen my fitter pull a shaft from an adaptor they have come out clean. Also I would probably be less concerned about saving the adapter, depending on cost. Would look at more like an incremental cost of the shaft. But it is good to know that more care needs to be taken when pulling from an adaptor...

While I assume that the original adapters are not inherently cheap, I do have the relationship with my fitter/builder where he will put adapters on shafts for me. He has a Callaway setup and there is not much market where I live for esoteric JDM. So if I want to try a Crazy shaft, I buy it and figure what to put it in… Right now I am more of an iron ho than a full on club ho, although having 3 of the best conforming compact blades made I might need to retire and try a different ho'ing specialty. Why do you say there is more risk with removing adaptors than heads?