TourSpecGolfer

Kuro is a 1 piece head, the 727V is closest if you want that but it isn't as forgiving or soft, it does have a better setup though and is not too compact, just a little smaller than Kuros. RB247G that would be TW727P model for sure.

Round #3 in the books with these, let me update my experience with them: - R Flex Shafts would leak right for me on full swings obviously because they are NS950 Regular and I usually play stiff - These irons are really good in softer conditions especially for steep swingers, the bounce keeps the head from digging very well - Feel is not exactly as soft as VG3 but pretty close, less spongy, perfectly firm for a GI iron - Size is larger than most heel to toe length and face height but soles are not super wide, nor does it have a lot of offset or a thick top line - Distance is about 1 club up from most traditional lofted clubs - workability will require an emphasized path or a softer flex shaft to exaggerate swing adjustments, if the shaft is too stiff don't expect much. I'm going to be shafting these with OT105's in Stiff Flex next.

Just an older model GF mallet, I've had a few modded in 2015 and they are pretty light heads in the 340's in some cases lighter although when you play it they don't feel that light as if it were an answer style, excellent mallet for fast greens.

March release guys.

We are down to our last 6 sets of heads.

no 105 in R as of now it seems

Thanks for this, Titleist just had their unveiling a couple days ago in Tokyo. There is usually 2 types forged and non.

Yup also Black Wedges before that. Now the IYA DO MO 13* driver.

Yes recently I am preferring these to MCI's as well.

What Im wondering is what this does to the balance on this putter, does the center weight cause more head twist at impact?

Mitsubishi OT Shafts have been highly suggested by TSG since release because they feel great, are very user friendly producing easy launching and accurate results and they are somewhat reasonably priced for a top performing carbon shaft. Mitsubishi has just announced 2 new weights, the i75 and i105, this gets me excited as I'm a big fan of the i95 I was waiting for something a bit heavier and I think 105 is really optimal for a lot of players. Also a new light weight KuroKage XM is coming early next year geared to players who want a lighter weight shaft perhaps due to a smoother tempo and transition which will ultimately aid those players in gaining more distance, we always say use the lightest shaft that you can control with the accuracy you want and considering these are coming in X flex Mitsubishi is covering all it's bases. More info to come closer to release and at the 2016 Japan Golf Fair.

Not sure sir. My suggestion is to get the R and yank the shafts.

oops! lol I stand corrected. Ok go ahead call me Chrissy for that then!

He likes to call me Chrissy :) Watch out I have the ability to change your account name from Hutchy to Brianna ;) These look beautiful, thanks for the clear pics and please keep us updated on wear/feel.

I would agree, 125 is more accurate, slightly lower trajectory, feels stiff. Modus 130 feels a hair softer, has a bit more kick, feels closer to what you would expect from NSPro, higher launch than 125, wider dispersion.

Plenty good feedback guys, I appreciate it! 1. Make logo smaller and tilt 2. Use semi dark gray for # 3. Change font for # 4. Slightly lengthen Neck 5. Create Covers for 3/4/5/6/7/8/9/PW/AW/SW/LW in Set 6. Make Seven Version + TSG Version Hows that sound? The magnet is built inside the cover so it is invisible, it is very strong and yes will attach to your shaft or iron head reducing the chances of it falling off.

Any idea the name of that font?

Sorry for the bad pics and no these are not made in Japan but they are the 2nd evolution of our iron head covers. Faux leather edge Faux carbon exterior Magnet button inside size is 10-15% smaller than most iron covers for a tighter fit Any changes? Logo black instead of red?

In 1-2 weeks sir :)

Modart makes many of their clubs fully CNC like this. The tolerance this tight doesn't matter in Golf but it sure is cool. It doesn't appear to be 100% CNC milled, the sole is ground perhaps by hand or if mass produced. Bridgestone doesn't need Mugen to do this. What I would like to see is the results on spin these Mugen grooves produce. Right now in the "conforming" world Callaway has imo the best grooves which I believe are done by a factory I know in Taiwan.

Only 25 Sets Produced the 2016 Seven CB Limited. larger and more forgiving than the original cavity blade yet still geared to the player, semi traditional lofts coming in with a PW @ 47* New wide bump in the cavity creates a higher ball flight and denser feel during impact. http://www.tourspecgolf.com/blog/2016-seven-cb-iron-limited/

Here's a nice one by Gold's! I never thought of placing a weight dead center before, pretty cool idea.

New Miura Giken CB1008 Forged Irons and what appears to be a revised PP-9005, not sure what the changes are but looking forward as the current PP-9005 is pretty awesome just in short supply. Sorry these pics are fuzzy. Coming qtr 1 2016.

Best for me has been: ZY11 w/7D Ryoma Special Tune Maxima w/7D ( this is the only shaft to tame this one for me ) Grandista w/ Sanki 70S RomaRo Alpha w/7D control ( one amazingly straight and long club ) Clubs I've hit lately and liked but need to re-shaft for a better evaluation. Katana Voltio III PRGR Super Egg What I want to try next is Maruman's new Vanquish ( on the way :) I want to try Freiheit The-G 460Ti Driver as well. Docus is ugly with a dumb name but the DCD701 is very good even with stock shaft, I think the purests will prefer the 702 model. Lastly is Baldo, they have a new COMPETIZIONE 568 420cc Driver I'm adding to the store this week. not my cup of tea because I like 460 but I love a deep face so it's a must try. Ah yes Ghibli can't forget that one, very straight mid high and long. So much good stuff right now in my eyes, for me I don't want spin and I hit a high ball but since 7D I've been able tame a lot of drivers I otherwise wouldn't be able to hit straight.

There are 2 sets of P2's in the works right now, I hope the owners post them up when they receive them new then later after 3 months or so of play.